365app

联系我们 | 网站地图欢迎访问365app官方网站!
4产品中心
您的位置: 首页 ->  产品中心
口罩机
口罩机

口罩机

 详情说明
口罩机产品视频
口罩机概述
本机主要用于平面式口罩自动成型:整卷布料放卷后经过滚轮驱动,布料通 过自动折边、包边;鼻梁条整卷牵引开卷,定长裁切后导入至包边布料中,双边 通过超声焊接至封口,再经过超声侧向封口,通过切刀裁切成型;通过流水线将 口罩输送至两个口罩耳带熔接工位,通过超声焊接最终口罩成型;当口罩制成后, 通过流水线输送至平带线收集。
This machine is mainly used for automatic forming of flat face mask: the whole roll of cloth is driven by roller after unwinding, and the cloth is folded and wrapped automatically; the nose beam is pulled and uncoiled by the whole roll, cut to a fixed length and then imported into the wrapped cloth, and the two sides are welded to the seal by ultrasonic welding, and then sealed laterally by ultrasonic, and then cut and formed by cutter; the cloth is wrapped by assembly line The mask is delivered to two mask ear belt welding stations, and finally formed by ultrasonic welding; when the mask is made, it is delivered to the flat belt line through the assembly line for collection
设备简图
(此图仅供参考,设备以实物为准)
equipment diagram (this drawing is for reference only, and the equipment shall be subject to the real object)
设备安装与配置需求
(1)设备尺寸:6800mm(L)×3800mm(W)×2000mm(H);
equipment size: 6800mm (L) × 3800mm (W) × 2000mm (H);
(2)外观颜色:无特殊说明时按照工厂标准;
appearance color: according to the factory standard if there is no special instructions;
(3)设备重量:≤4500kg,地面承重≤500KG/m2;
equipment weight: ≤ 4500kg, ground bearing capacity ≤ 500kg / m2;
(4)工作电源:220V,50HZ,额定功率约10KW;
working power supply: 220V, 50Hz, rated power: 10kW;
(5)压缩空气:0.5~0.7MPa,使用流量约300L/min;
compressed air: 0.5-0.7mpa, flow rate: 300L / min;
(6)使用环境:温度10~35℃、湿度5-35%HR,无可燃性、腐蚀性气体,无粉尘(洁净度不低于10万级)
operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).
(7)操作人员:1人
Operator: 1
设备主要组成结构
序号
Serial number
部件名称
Part name
数量
Quantity
备注
remarks
1 滤水布/过滤棉/吸水层放卷机构
Filter cloth / filter cotton / water absorption layer unwinding mechanism
3套
3sets
2 鼻梁条放卷机构
Nose strip unwinding mechanism
1套
1sets
3 鼻梁条校直机构
Bridge straightening mechanism
1套
1 sets
宽度 3-7mm
Width 3-7mm
4 鼻梁条驱动、裁切机构
Driving and cutting mechanism of nose beam
1套
1 sets
宽度 3-7mm
Width 3-7mm
5 布料折边机构
Fabric folding mechanism
1套
1 sets
6 滚焊封边机构
Rolling welding edge sealing mechanism
2套
2 sets
双边
bilateral
7 布料驱动机构
Cloth driving mechanism
1套
1 sets
8 布料扇折机构
Fabric folding mechanism
1套
1 sets
9 滚焊侧缝机构
Roll welding side seam mechanism
2套
2 sets
10 滚封机构
Rolling mechanism
1套
1 sets
11 转运流水线
Transfer line
2条
2article
12 分流机构
Shunt mechanism
2套
2 sets
13 耳带焊机机构
Ear band welding machine mechanism
2套
2 sets
14 下料流水线
Blanking line
2条
2article
15 操作系统
operating system
1套
1 sets
16 操作面板
operation panel
1套
1 sets
适用来料规格
applicable incoming specifications
项目
project
挂轴数量
Number of hanging axle
宽度(mm)
Width (mm)
卷料外径(mm)
Outer diameter of coil (mm)
料筒内径 (mm)
Inner diameter of barrel (mm)
重量
weight
布料
cloth
3 170-200 Φ600 Φ76.2 Max 15kg
鼻梁条
Nose bar
1 3-7 Φ400 Φ76.2 Max 25kg
耳带
Auricular band

4 bags
3 -- -- --
生产产品规格
production product specification:
标准型:175*95mm
Standard Type: 175 * 95mm
博昌机械公司实力
  • 博昌机械厂房占地面积为3000平方米。
  • 公司具备较强的非标设计、制造和服务能力。
  • 生产检测设备完善、规格品种齐全、产品质量稳定可靠,能够为客户提供良好的解决方案。
  • 专业的人才、良好的管理、精良的技术、制造三保设备是我们不息的追求。
联系博昌机械
  • 返回顶部
  • QQ咨询
  • 阿里商铺
  • 阿里旺旺
  • 微信小程序
    博昌机械
365app-365体育官网app下载
Baidu
sogou